You may not have heard of us because we have concentrated our business with model builders. We started here because we have a better material for making templates than Mylar which was being used. Unlike Mylar, SEE TEMP.® requires no tracing or drawing and is used directly over a plan or pattern and does not have to be cut completely through. However, you can draw on it with: a pencil, ball-point pen, or a permanent ink felt tip marker such as Sanford's Sharpie.

SEE TEMP. ® can be scored (cut about half way through) with a sharp modeling or utility knife. It is scored directly over your plan, pattern or blueprint. Then the template is broken-out and is used to duplicate parts from wood or other material. It is easy, accurate, quick, and plans or patterns are saved. You produce a template that can be used over and over again. One of our customer's has used his templates regularly for over 30 years (he is a model kit producer located in Madison, Wisconsin). The finished templates are easy to store along with plans and patterns.

SEE TEMP. ® is very stable and is only affected by extreme hot and cold fluctuations in temperature. This product should be stored flat at room temperature. The sheet dimensions are: 22 inches by 52 inches and is .011 inches thick. SEE TEMP.® has a frosted finish on both sides and produces no glare. Many photographers have used SEE TEMP.® as a backdrop because there is no bounce-back from flash.